1 files changed, 0 insertions, 543 deletions

diff --git a/.ncmpcpp/config b/.ncmpcpp/config
deleted file mode 100644
index 5e9cf38..0000000
--- a/.ncmpcpp/config
+++ /dev/null
@@ -1,543 +0,0 @@
-##############################################################################
-## This is the example configuration file. Copy it to $HOME/.ncmpcpp/config ##
-## or $XDG_CONFIG_HOME/ncmpcpp/config and set up your preferences.          ##
-##############################################################################
-#
-##### directories ######
-##
-## Directory for storing ncmpcpp related files.  Changing it is useful if you
-## want to store everything somewhere else and provide command line setting for
-## alternative location to config file which defines that while launching
-## ncmpcpp.
-##
-#
-#ncmpcpp_directory = ~/.ncmpcpp
-#
-##
-## Directory for storing downloaded lyrics. It defaults to ~/.lyrics since other
-## MPD clients (eg. ncmpc) also use that location.
-##
-#
-#lyrics_directory = ~/.lyrics
-#
-##### connection settings #####
-#
-#mpd_host = localhost
-#
-#mpd_port = 6600
-#
-#mpd_connection_timeout = 5
-#
-## Needed for tag editor and file operations to work.
-##
-mpd_music_dir = ~/Music
-#
-#mpd_crossfade_time = 5
-#
-##### music visualizer #####
-##
-## Note: In order to make music visualizer work you'll need to use mpd fifo
-## output, whose format parameter has to be set to 44100:16:1 for mono
-## visualization or 44100:16:2 for stereo visualization. Example configuration
-## (it has to be put into mpd.conf):
-##
-## audio_output {
-##        type            "fifo"
-##        name            "Visualizer feed"
-##        path            "/tmp/mpd.fifo"
-##        format          "44100:16:2"
-## }
-##
-#
-#visualizer_fifo_path = /tmp/mpd.fifo
-#
-##
-## Note: Below parameter is needed for ncmpcpp to determine which output
-## provides data for visualizer and thus allow syncing between visualization and
-## sound as currently there are some problems with it.
-##
-#
-#visualizer_output_name = Visualizer feed
-#
-##
-## If you set format to 44100:16:2, make it 'yes'.
-##
-#visualizer_in_stereo = yes
-#
-##
-## Note: Below parameter defines how often ncmpcpp has to "synchronize"
-## visualizer and audio outputs.  30 seconds is optimal value, but if you
-## experience synchronization problems, set it to lower value.  Keep in mind
-## that sane values start with >=10.
-##
-#
-#visualizer_sync_interval = 30
-#
-##
-## Note: To enable spectrum frequency visualization you need to compile ncmpcpp
-## with fftw3 support.
-##
-#
-## Available values: spectrum, wave, wave_filled, ellipse.
-##
-#visualizer_type = wave
-#
-#visualizer_look = ●▮
-#
-#visualizer_color = blue, cyan, green, yellow, magenta, red
-#
-## Alternative subset of 256 colors for terminals that support it.
-##
-#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
-#
-##### system encoding #####
-##
-## ncmpcpp should detect your charset encoding but if it failed to do so, you
-## can specify charset encoding you are using here.
-##
-## Note: You can see whether your ncmpcpp build supports charset detection by
-## checking output of `ncmpcpp --version`.
-##
-## Note: Since MPD uses UTF-8 by default, setting this option makes sense only
-## if your encoding is different.
-##
-#
-#system_encoding = ""
-#
-##### delays #####
-#
-## Time of inactivity (in seconds) after playlist highlighting will be disabled
-## (0 = always on).
-##
-#playlist_disable_highlight_delay = 5
-#
-## Defines how long messages are supposed to be visible.
-##
-#message_delay_time = 5
-#
-##### song format #####
-##
-## For a song format you can use:
-##
-## %l - length
-## %f - filename
-## %D - directory
-## %a - artist
-## %A - album artist
-## %t - title
-## %b - album
-## %y - date
-## %n - track number (01/12 -> 01)
-## %N - full track info (01/12 -> 01/12)
-## %g - genre
-## %c - composer
-## %p - performer
-## %d - disc
-## %C - comment
-## %P - priority
-## $R - begin right alignment
-##
-## If you want to make sure that a part of the format is displayed only when
-## certain tags are present, you can archieve it by grouping them with brackets,
-## e.g. '{%a - %t}' will be evaluated to 'ARTIST - TITLE' if both tags are
-## present or '' otherwise.  It is also possible to define a list of
-## alternatives by providing several groups and separating them with '|',
-## e.g. '{%t}|{%f}' will be evaluated to 'TITLE' or 'FILENAME' if the former is
-## not present.
-##
-## Note: If you want to set limit on maximal length of a tag, just put the
-## appropriate number between % and character that defines tag type, e.g. to
-## make album take max. 20 terminal cells, use '%20b'.
-##
-## In addition, formats support markers used for text attributes.  They are
-## followed by character '$'. After that you can put:
-##
-## - 0 - default window color (discards all other colors)
-## - 1 - black
-## - 2 - red
-## - 3 - green
-## - 4 - yellow
-## - 5 - blue
-## - 6 - magenta
-## - 7 - cyan
-## - 8 - white
-## - 9 - end of current color
-## - b - bold text
-## - u - underline text
-## - r - reverse colors
-## - a - use alternative character set
-##
-## If you don't want to use a non-color attribute anymore, just put it again,
-## but this time insert character '/' between '$' and attribute character,
-## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename with
-## reversed colors.
-##
-## If you want to use 256 colors and/or background colors in formats (the naming
-## scheme is described below in section about color definitions), it can be done
-## with the syntax $(COLOR), e.g. to set the artist tag to one of the
-## non-standard colors and make it have yellow background, you need to write
-## $(197_yellow)%a$(end). Note that for standard colors this is interchangable
-## with attributes listed above.
-##
-## Note: colors can be nested.
-##
-#
-#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
-#
-#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
-#
-#song_library_format = {%n - }{%t}|{%f}
-#
-#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
-#
-#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
-#
-#current_item_prefix = $(yellow)$r
-#
-#current_item_suffix = $/r$(end)
-#
-#current_item_inactive_column_prefix = $(white)$r
-#
-#current_item_inactive_column_suffix = $/r$(end)
-#
-#now_playing_prefix = $b
-#
-#now_playing_suffix = $/b
-#
-#browser_playlist_prefix = "$2playlist$9 "
-#
-#selected_item_prefix = $6
-#
-#selected_item_suffix = $9
-#
-#modified_item_prefix = $3> $9
-#
-##
-## Note: attributes are not supported for the following variables.
-##
-#song_window_title_format = {%a - }{%t}|{%f}
-##
-## Note: Below variables are used for sorting songs in browser.  The sort mode
-## determines how songs are sorted, and can be used in combination with a sort
-## format to specify a custom sorting format.  Available values for
-## browser_sort_mode are "name", "mtime", "format" and "noop".
-##
-#
-#browser_sort_mode = name
-#
-#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
-#
-##### columns settings #####
-##
-## syntax of song columns list format is "column column etc."
-##
-## - syntax for each column is:
-##
-## (width of the column)[color of the column]{displayed tag}
-##
-## Note: Width is by default in %, if you want a column to have fixed size, add
-## 'f' after the value, e.g. (10)[white]{a} will be the column that take 10% of
-## screen (so the real width will depend on actual screen size), whereas
-## (10f)[white]{a} will take 10 terminal cells, no matter how wide the screen
-## is.
-##
-## - color is optional (if you want the default one, leave the field empty).
-##
-## Note: You can give a column additional attributes by putting appropriate
-## character after displayed tag character. Available attributes are:
-##
-## - r - column will be right aligned
-## - E - if tag is empty, empty tag marker won't be displayed
-##
-## You can also:
-##
-## - give a column custom name by putting it after attributes, separated with
-##   character ':', e.g. {lr:Length} gives you right aligned column of lengths
-##   named "Length".
-##
-## - define sequence of tags, that have to be displayed in case predecessor is
-##   empty in a way similar to the one in classic song format, i.e. using '|'
-##   character, e.g. {a|c|p:Owner} creates column named "Owner" that tries to
-##   display artist tag and then composer and performer if previous ones are not
-##   available.
-##
-#
-#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
-#
-##### various settings #####
-#
-##
-## Note: Custom command that will be executed each time song changes. Useful for
-## notifications etc.
-##
-execute_on_song_change = notify-send "$(mpc current)" --app-name="ncmpcpp" --icon="folder-music"
-#
-##
-## Note: Custom command that will be executed each time player state
-## changes. The environment variable MPD_PLAYER_STATE is set to the current
-## state (either unknown, play, pause, or stop) for its duration.
-##
-#
-#execute_on_player_state_change = ""
-#
-#playlist_show_mpd_host = no
-#
-#playlist_show_remaining_time = no
-#
-#playlist_shorten_total_times = no
-#
-#playlist_separate_albums = no
-#
-##
-## Note: Possible display modes: classic, columns.
-##
-#playlist_display_mode = columns
-#
-#browser_display_mode = classic
-#
-#search_engine_display_mode = classic
-#
-#playlist_editor_display_mode = classic
-#
-#discard_colors_if_item_is_selected = yes
-#
-#show_duplicate_tags = yes
-#
-#incremental_seeking = yes
-#
-#seek_time = 1
-#
-#volume_change_step = 2
-#
-#autocenter_mode = no
-#
-#centered_cursor = no
-#
-##
-## Note: You can specify third character which will be used to build 'empty'
-## part of progressbar.
-##
-#progressbar_look = =>
-#
-## Available values: database, playlist.
-##
-#default_place_to_search_in = database
-#
-## Available values: classic, alternative.
-##
-user_interface = alternative
-#
-#data_fetching_delay = yes
-#
-## Available values: artist, album_artist, date, genre, composer, performer.
-##
-#media_library_primary_tag = artist
-#
-#media_library_albums_split_by_date = yes
-#
-## Available values: wrapped, normal.
-##
-#default_find_mode = wrapped
-#
-#default_tag_editor_pattern = %n - %t
-#
-#header_visibility = yes
-#
-#statusbar_visibility = yes
-#
-#titles_visibility = yes
-#
-#header_text_scrolling = yes
-#
-#cyclic_scrolling = no
-#
-#lines_scrolled = 2
-#
-#lyrics_fetchers = lyricwiki, azlyrics, genius, sing365, lyricsmania, metrolyrics, justsomelyrics, jahlyrics, plyrics, tekstowo, internet
-#
-#follow_now_playing_lyrics = no
-#
-#fetch_lyrics_for_current_song_in_background = no
-#
-#store_lyrics_in_song_dir = no
-#
-#generate_win32_compatible_filenames = yes
-#
-#allow_for_physical_item_deletion = no
-#
-##
-## Note: If you set this variable, ncmpcpp will try to get info from last.fm in
-## language you set and if it fails, it will fall back to english. Otherwise it
-## will use english the first time.
-##
-## Note: Language has to be expressed as an ISO 639 alpha-2 code.
-##
-#lastfm_preferred_language = en
-#
-#space_add_mode = add_remove
-#
-#show_hidden_files_in_local_browser = no
-#
-##
-## How shall screen switcher work?
-##
-## - "previous" - switch between the current and previous screen.
-## - "screen1,...,screenN" - switch between given sequence of screens.
-##
-## Screens available for use: help, playlist, browser, search_engine,
-## media_library, playlist_editor, tag_editor, outputs, visualizer, clock,
-## lyrics, last_fm.
-##
-#screen_switcher_mode = playlist, browser
-#
-##
-## Note: You can define startup screen by choosing screen from the list above.
-##
-#startup_screen = playlist
-#
-##
-## Note: You can define startup slave screen by choosing screen from the list
-## above or an empty value for no slave screen.
-##
-#startup_slave_screen = ""
-#
-#startup_slave_screen_focus = no
-#
-##
-## Default width of locked screen (in %).  Acceptable values are from 20 to 80.
-##
-#
-#locked_screen_width_part = 50
-#
-#ask_for_locked_screen_width_part = yes
-#
-#jump_to_now_playing_song_at_start = yes
-#
-#ask_before_clearing_playlists = yes
-#
-#clock_display_seconds = no
-#
-#display_volume_level = yes
-#
-#display_bitrate = no
-#
-#display_remaining_time = no
-#
-## Available values: none, basic, extended, perl.
-##
-#regular_expressions = perl
-#
-##
-## Note: if below is enabled, ncmpcpp will ignore leading "The" word while
-## sorting items in browser, tags in media library, etc.
-##
-#ignore_leading_the = no
-#
-##
-## Note: if below is enabled, ncmpcpp will ignore diacritics while searching and
-## filtering lists. This takes an effect only if boost was compiled with ICU
-## support.
-##
-#ignore_diacritics = no
-#
-#block_search_constraints_change_if_items_found = yes
-#
-#mouse_support = yes
-#
-#mouse_list_scroll_whole_page = yes
-#
-#empty_tag_marker = <empty>
-#
-#tags_separator = " | "
-#
-#tag_editor_extended_numeration = no
-#
-#media_library_sort_by_mtime = no
-#
-#enable_window_title = yes
-#
-##
-## Note: You can choose default search mode for search engine. Available modes
-## are:
-##
-## - 1 - use mpd built-in searching (no regexes, pattern matching)
-##
-## - 2 - use ncmpcpp searching (pattern matching with support for regexes, but
-##       if your mpd is on a remote machine, downloading big database to process
-##       it can take a while
-##
-## - 3 - match only exact values (this mode uses mpd function for searching in
-##       database and local one for searching in current playlist)
-##
-#
-#search_engine_default_search_mode = 1
-#
-#external_editor = nano
-#
-## Note: set to yes if external editor is a console application.
-##
-#use_console_editor = yes
-#
-##### colors definitions #####
-##
-## It is possible to set a background color by setting a color value
-## "<foreground>_<background>", e.g. red_black will set foregound color to red
-## and background color to black.
-##
-## In addition, for terminals that support 256 colors it is possible to set one
-## of them by using a number in range [1, 256] instead of color name,
-## e.g. numerical value corresponding to red_black is 2_1. To find out if the
-## terminal supports 256 colors, run ncmpcpp and check out the bottom of the
-## help screen for list of available colors and their numerical values.
-##
-## What is more, there are two special values for the background color:
-## "transparent" and "current". The first one explicitly sets the background to
-## be transparent, while the second one allows you to preserve current
-## background color and change only the foreground one. It's used implicitly
-## when background color is not specified.
-##
-## Moreover, it is possible to attach format information to selected color
-## variables by appending to their end a colon followed by one or more format
-## flags, e.g. black:b or red:ur. The following variables support this syntax:
-## visualizer_color, color1, color2, empty_tag_color, volume_color,
-## state_line_color, state_flags_color, progressbar_color,
-## progressbar_elapsed_color, player_state_color, statusbar_time_color,
-## alternative_ui_separator_color.
-##
-## Note: due to technical limitations of older ncurses version, if 256 colors
-## are used there is a possibility that you'll be able to use only colors with
-## transparent background.
-#
-#colors_enabled = yes
-#
-#empty_tag_color = cyan
-#
-#header_window_color = default
-#
-#volume_color = default
-#
-#state_line_color = default
-#
-#state_flags_color = default:b
-#
-#main_window_color = yellow
-#
-#color1 = white
-#
-#color2 = green
-#
-#progressbar_color = black:b
-#
-#progressbar_elapsed_color = green:b
-#
-#statusbar_color = default
-#
-#statusbar_time_color = default:b
-#
-#player_state_color = default:b
-#
-#alternative_ui_separator_color = black:b
-#
-#window_border_color = green
-#
-#active_window_border = red