1 files changed, 358 insertions, 0 deletions

diff --git a/.local/bin/moss b/.local/bin/moss
new file mode 100755
index 0000000..556e623
--- /dev/null
+++ b/.local/bin/moss
@@ -0,0 +1,358 @@
+#!/usr/bin/perl
+#
+# Please read all the comments down to the line that says "TOP".
+# These comments are divided into three sections:
+#
+#     1. usage instructions
+#     2. installation instructions
+#     3. standard copyright
+#
+# Feel free to share this script with other instructors of programming
+# classes, but please do not place the script in a publicly accessible
+# place.  Comments, questions, and bug reports should be sent to
+# moss-request@moss.stanford.edu.
+#
+# IMPORTANT: This script is known to work on Unix and on Windows using Cygwin.
+# It is not known to work on other ways of using Perl under Windows.  If the
+# script does not work for you under Windows, you can try the email-based
+# version for Windows (available on the Moss home page).
+#
+
+#
+#  Section 1. Usage instructions
+#
+#  moss [-l language] [-d] [-b basefile1] ... [-b basefilen] [-m #] [-c "string"] file1 file2 file3 ...
+#
+# The -l option specifies the source language of the tested programs.
+# Moss supports many different languages; see the variable "languages" below for the
+# full list.
+#
+# Example: Compare the lisp programs foo.lisp and bar.lisp:
+#
+#    moss -l lisp foo.lisp bar.lisp
+#
+#
+# The -d option specifies that submissions are by directory, not by file.
+# That is, files in a directory are taken to be part of the same program,
+# and reported matches are organized accordingly by directory.
+#
+# Example: Compare the programs foo and bar, which consist of .c and .h
+# files in the directories foo and bar respectively.
+#
+#    moss -d foo/*.c foo/*.h bar/*.c bar/*.h
+#
+# Example: Each program consists of the *.c and *.h files in a directory under
+# the directory "assignment1."
+#
+#    moss -d assignment1/*/*.h assignment1/*/*.c
+#
+#
+# The -b option names a "base file".  Moss normally reports all code
+# that matches in pairs of files.  When a base file is supplied,
+# program code that also appears in the base file is not counted in matches.
+# A typical base file will include, for example, the instructor-supplied
+# code for an assignment.  Multiple -b options are allowed.  You should
+# use a base file if it is convenient; base files improve results, but
+# are not usually necessary for obtaining useful information.
+#
+# IMPORTANT: Unlike previous versions of moss, the -b option *always*
+# takes a single filename, even if the -d option is also used.
+#
+# Examples:
+#
+#  Submit all of the C++ files in the current directory, using skeleton.cc
+#  as the base file:
+#
+#    moss -l cc -b skeleton.cc *.cc
+#
+#  Submit all of the ML programs in directories asn1.96/* and asn1.97/*, where
+#  asn1.97/instructor/example.ml and asn1.96/instructor/example.ml contain the base files.
+#
+#    moss -l ml -b asn1.97/instructor/example.ml -b asn1.96/instructor/example.ml -d asn1.97/*/*.ml asn1.96/*/*.ml
+#
+# The -m option sets the maximum number of times a given passage may appear
+# before it is ignored.  A passage of code that appears in many programs
+# is probably legitimate sharing and not the result of plagiarism.  With -m N,
+# any passage appearing in more than N programs is treated as if it appeared in
+# a base file (i.e., it is never reported).  Option -m can be used to control
+# moss' sensitivity.  With -m 2, moss reports only passages that appear
+# in exactly two programs.  If one expects many very similar solutions
+# (e.g., the short first assignments typical of introductory programming
+# courses) then using -m 3 or -m 4 is a good way to eliminate all but
+# truly unusual matches between programs while still being able to detect
+# 3-way or 4-way plagiarism.  With -m 1000000 (or any very
+# large number), moss reports all matches, no matter how often they appear.
+# The -m setting is most useful for large assignments where one also a base file
+# expected to hold all legitimately shared code.  The default for -m is 10.
+#
+# Examples:
+#
+#   moss -l pascal -m 2 *.pascal
+#   moss -l cc -m 1000000 -b mycode.cc asn1/*.cc
+#
+#
+# The -c option supplies a comment string that is attached to the generated
+# report.  This option facilitates matching queries submitted with replies
+# received, especially when several queries are submitted at once.
+#
+# Example:
+#
+#   moss -l scheme -c "Scheme programs" *.sch
+#
+# The -n option determines the number of matching files to show in the results.
+# The default is 250.
+#
+# Example:
+#   moss -c java -n 200 *.java
+# The -x option sends queries to the current experimental version of the server.
+# The experimental server has the most recent Moss features and is also usually
+# less stable (read: may have more bugs).
+#
+# Example:
+#
+#   moss -x -l ml *.ml
+#
+
+
+#
+# Section 2.  Installation instructions.
+#
+# You may need to change the very first line of this script
+# if perl is not in /usr/bin on your system.  Just replace /usr/bin
+# with the pathname of the directory where perl resides.
+#
+
+#
+#  3. Standard Copyright
+#
+#Copyright (c) 1997 The Regents of the University of California.
+#All rights reserved.
+#
+#Permission to use, copy, modify, and distribute this software for any
+#purpose, without fee, and without written agreement is hereby granted,
+#provided that the above copyright notice and the following two
+#paragraphs appear in all copies of this software.
+#
+#IN NO EVENT SHALL THE UNIVERSITY OF CALIFORNIA BE LIABLE TO ANY PARTY FOR
+#DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
+#OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE UNIVERSITY OF
+#CALIFORNIA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+#THE UNIVERSITY OF CALIFORNIA SPECIFICALLY DISCLAIMS ANY WARRANTIES,
+#INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+#AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
+#ON AN "AS IS" BASIS, AND THE UNIVERSITY OF CALIFORNIA HAS NO OBLIGATION TO
+#PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+#
+#
+# STOP.  It should not be necessary to change anything below this line
+# to use the script.
+#
+use IO::Socket;
+
+#
+# As of the date this script was written, the following languages were supported.  This script will work with
+# languages added later however.  Check the moss website for the full list of supported languages.
+#
+@languages = ("c", "cc", "java", "ml", "pascal", "ada", "lisp", "scheme", "haskell", "fortran", "ascii", "vhdl", "perl", "matlab", "python", "mips", "prolog", "spice", "vb", "csharp", "modula2", "a8086", "javascript", "plsql", "verilog");
+
+$server = 'moss.stanford.edu';
+$port = '7690';
+$noreq = "Request not sent.";
+$usage = "usage: moss [-x] [-l language] [-d] [-b basefile1] ... [-b basefilen] [-m #] [-c \"string\"] file1 file2 file3 ...";
+
+#
+# The userid is used to authenticate your queries to the server; don't change it!
+#
+$userid=173681612;
+
+#
+# Process the command line options.  This is done in a non-standard
+# way to allow multiple -b's.
+#
+$opt_l = "c";   # default language is c
+$opt_m = 10;
+$opt_d = 0;
+$opt_x = 0;
+$opt_c = "";
+$opt_n = 250;
+$bindex = 0;    # this becomes non-zero if we have any base files
+
+while (@ARGV && ($_ = $ARGV[0]) =~ /^-(.)(.*)/) {
+    ($first,$rest) = ($1,$2);
+
+    shift(@ARGV);
+    if ($first eq "d") {
+        $opt_d = 1;
+        next;
+    }
+    if ($first eq "b") {
+        if($rest eq '') {
+            die "No argument for option -b.\n" unless @ARGV;
+            $rest = shift(@ARGV);
+        }
+        $opt_b[$bindex++] = $rest;
+        next;
+    }
+    if ($first eq "l") {
+        if ($rest eq '') {
+            die "No argument for option -l.\n" unless @ARGV;
+            $rest = shift(@ARGV);
+        }
+        $opt_l = $rest;
+        next;
+    }
+    if ($first eq "m") {
+        if($rest eq '') {
+            die "No argument for option -m.\n" unless @ARGV;
+            $rest = shift(@ARGV);
+        }
+        $opt_m = $rest;
+        next;
+    }
+    if ($first eq "c") {
+        if($rest eq '') {
+            die "No argument for option -c.\n" unless @ARGV;
+            $rest = shift(@ARGV);
+        }
+        $opt_c = $rest;
+        next;
+    }
+    if ($first eq "n") {
+        if($rest eq '') {
+            die "No argument for option -n.\n" unless @ARGV;
+            $rest = shift(@ARGV);
+        }
+        $opt_n = $rest;
+        next;
+    }
+    if ($first eq "x") {
+        $opt_x = 1;
+        next;
+    }
+    #
+    # Override the name of the server.  This is used for testing this script.
+    #
+    if ($first eq "s") {
+        $server = shift(@ARGV);
+        next;
+    }
+    #
+    # Override the port.  This is used for testing this script.
+    #
+    if ($first eq "p") {
+        $port = shift(@ARGV);
+        next;
+    }
+    die "Unrecognized option -$first.  $usage\n";
+}
+
+#
+# Check a bunch of things first to ensure that the
+# script will be able to run to completion.
+#
+
+#
+# Make sure all the argument files exist and are readable.
+#
+print "Checking files . . . \n";
+$i = 0;
+while($i < $bindex)
+{
+    die "Base file $opt_b[$i] does not exist. $noreq\n" unless -e "$opt_b[$i]";
+    die "Base file $opt_b[$i] is not readable. $noreq\n" unless -r "$opt_b[$i]";
+    die "Base file $opt_b is not a text file. $noreq\n" unless -T "$opt_b[$i]";
+    $i++;
+}
+foreach $file (@ARGV)
+{
+    die "File $file does not exist. $noreq\n" unless -e "$file";
+    die "File $file is not readable. $noreq\n" unless -r "$file";
+    die "File $file is not a text file. $noreq\n" unless -T "$file";
+}
+
+if ("@ARGV" eq '') {
+    die "No files submitted.\n $usage";
+}
+print "OK\n";
+
+#
+# Now the real processing begins.
+#
+
+
+$sock = new IO::Socket::INET (
+                                  PeerAddr => $server,
+                                  PeerPort => $port,
+                                  Proto => 'tcp',
+                                 );
+die "Could not connect to server $server: $!\n" unless $sock;
+$sock->autoflush(1);
+
+sub read_from_server {
+    $msg = <$sock>;
+    print $msg;
+}
+
+sub upload_file {
+    local ($file, $id, $lang) = @_;
+#
+# The stat function does not seem to give correct filesizes on windows, so
+# we compute the size here via brute force.
+#
+    open(F,$file);
+    $size = 0;
+    while (<F>) {
+        $size += length($_);
+    }
+    close(F);
+
+    print "Uploading $file ...";
+    open(F,$file);
+    $file =~s/\s/\_/g;    # replace blanks in filename with underscores
+    print $sock "file $id $lang $size $file\n";
+    while (<F>) {
+        print $sock $_;
+    }
+    close(F);
+    print "done.\n";
+}
+
+
+print $sock "moss $userid\n";      # authenticate user
+print $sock "directory $opt_d\n";
+print $sock "X $opt_x\n";
+print $sock "maxmatches $opt_m\n";
+print $sock "show $opt_n\n";
+
+#
+# confirm that we have a supported languages
+#
+print $sock "language $opt_l\n";
+$msg = <$sock>;
+chop($msg);
+if ($msg eq "no") {
+    print $sock "end\n";
+    die "Unrecognized language $opt_l.";
+}
+
+
+# upload any base files
+$i = 0;
+while($i < $bindex) {
+    &upload_file($opt_b[$i++],0,$opt_l);
+}
+
+$setid = 1;
+foreach $file (@ARGV) {
+    &upload_file($file,$setid++,$opt_l);
+}
+
+print $sock "query 0 $opt_c\n";
+print "Query submitted.  Waiting for the server's response.\n";
+&read_from_server();
+print $sock "end\n";
+close($sock);
+
+
+